Vacuum Angle Baffle Valve can be installed in Any Position
Vacuum angle baffle valve is used to cut off and connect the air flow, with light action and reliable work. A compressed air is used as the power, and the screw valve is used to lift the valve plate or rely on the enduring rotating hand wheel and the valve plate. The material of the valve body is carbon steel nickel-plated or stainless steel; the valve sealing material of the vacuum angle baffle valve is nitrile or fluorine rubber.
Vacuum angle baffle valve is used in the corner and tee of vacuum pipe. The driving mode is manual, pneumatic, electromagnetic and electric. The vacuum angle type baffle valve is a metal bellows seal. The vacuum angle type baffle valve has a wide range of applications and can also be used as a vacuum inflation valve. The vacuum angle baffle valve can be installed in any position, can be reversed to an atmospheric pressure, and has a feedback model output.
Vacuum angle baffle valve is similar to angle valve, at a right angle of 90 degrees. The inlet and outlet ends of the valve are not on the same axis. Generally, they are globe valves. The manual high vacuum angle type baffle valve is characterized by convenient, reliable and good sealing performance. It plays a role of blocking the medium and facilitating the maintenance of terminal equipment. However, the GD type manual high vacuum flapper valve is very different from the angle valve.
A sliding piston ring with graphite lubrication is used between the upper part of the spool of the vacuum angle baffle valve and the cage of the cage to seal between the spool and the cage. In order to reduce the impact caused by the imbalance of the spool, a large thrust actuator can be used. The vacuum angle baffle valve adopts a straight two-seat valve structure, and a balanced spool type structure can also be used. The bonnet gasket and spiral gasket are also used to seal between the cage and the upper bonnet. In addition, the fluid passes through the balanced connection hole on the top of the spool of the vacuum angle baffle valve, and acts on the bottom and top of the spool at the same time, eliminating most static imbalances, and has a certain effect, reducing the vibration caused by fluid flow the effects of the disturbance.
Vacuum angle baffle valve is classified into three types: manual vacuum angle baffle valve, pneumatic vacuum angle baffle valve, and electromagnetic vacuum angle baffle valve. Thread structure is mainly used, and flat convex structure can also be adopted. The working principle of the vacuum angle baffle valve is that the valve plate of the valve can move up and down through the valve stem to achieve sealing.
- ① Model GD-High Vacuum Baffle Valve Product Name and Model ② Model GD-High Vacuum Baffle Valve Caliber ③Whether accessories are provided so that we can choose the correct type for you.
- If the GD-high vacuum baffle valve model has been selected by the design unit, please order directly from the sales department according to the GD-high vacuum baffle valve model.
Vacuum angle baffle valve is a valve that is opened or closed by electromagnetic force and spring return force. Vacuum angle baffle valve is suitable for opening or blocking air flow in vacuum systems. When the valve is closed, the upper side of the sealing surface of the valve plate is allowed to withstand atmospheric pressure and the lower side is vacuum. In this state, the valve plate can be opened normally after the power of the electrical control box is turned on. The working angle of vacuum angle baffle valve is air, non-corrosive and gas without particulate dust.
