The Role of Net Sleeve in Stainless Steel Bellows
The mesh sleeve in the stainless steel bellows hose is mainly used to maintain the bellows and to bear the pressure effect of the medium pressure in the bellows. In order to ensure the quality of the stainless steel bellows mesh sleeve, the mesh sleeve of the stainless steel bellows needs to restrict the number of broken wires and the number of stacked wires. Below, the editor will give you a specific introduction.
The requirements for broken wires and stacked wires of stainless steel bellows, that is, the length of a certain standard bellows mesh sleeve, allow several broken or stacked wires. In fact, during the weaving process, broken filaments and stacked filaments are always inevitable. The test proves that the loose thread on the mound is the original source when doubling or weaving. If there is one of the inner root filaments that is good at the other, it may be incompetent during the movement, and it will be twisted into a “dead corner bend” and then be broken. Even if it is not twisted into a “dead corner bend”, it will not be seated in sequence. Among the expert strands, if one is good at the other, it may be a mess in the movement, and the result is disorderly and irregularly stacked together. Therefore, strict control of loose filaments is a good way to solve broken filaments and stacked filaments. In the extra range, the broken wire can be tightened with wire cutters and embedded under the net flower. In addition, as far as the wire is folded, try to use a screwdriver or blunt knife to loosen it.
