Precautions For Vacuum Pump Device
SaveSavedRemoved 0
Deal Score0
As we all know, we always encounter a lot of difficult problems in the process of installing the vacuum pump, which often makes us caught off guard. Then before installation, we should pay attention to the following points:
- Connect the power supply according to the rules of the motor sign, and install the appropriate standard fuses and thermal relays.
- Participate in smooth oil, start the vacuum pump, and investigate the rotation direction of the motor. If the rotation direction is wrong, adjust the phase line to ensure that the rotation direction is correct.
- Always check the position of the oil level, and refill in time when the oil is lacking. But be careful not to take too much smooth oil.
- Frequently check the oil quality and find out that the oil transformation status should be replaced with new oil in time to ensure the normal operation of the vacuum pump. Oil change cycle: the first time after 100 hours of operation and then every 500 to 2000 hours of operation, at least once every six months or under conditions of excessively high water absorption.
- Vacuum pumps have strict requirements for the quality of smooth oil. Do not use other vacuum pump oils in private to replace them, otherwise the vacuum pump will be damaged.
- If the gas sucked by the vacuum pump contains condensable steam, close the suction port of the vacuum pump before and after the operation every day and run the vacuum pump alone for 30 minutes to increase the temperature of the pump to a temperature that can effectively prevent the condensation of the gas. Vacuum pump for smooth oil purification. The vacuum pump should open the gas ballast valve during the operation to enhance the effect of sweeping condensable steam. And to shorten the replacement cycle of smooth oil.
- The exhaust port presents oil smoke or oil injection. Check the oil and gas separation gas at the exhaust port, clean or replace it. This accessory is a wearing part. The replacement period is 1 year. If there is too much pollution, the cycle time should be shortened.
