General Metal Hose Installation and Use Matters
Introduction of Universal Metal Hose
What is the difference between a universal metal hose and an ordinary metal hose? The universal metal hose is an important connecting member in engineering technology. It is composed of a stainless steel corrugated flexible tube wrapped with a braided mesh sleeve and joints at both ends. The advantages of the universal metal hose are: easy and fast installation, one model can be used in many fields, widely used and good versatility.
Stainless steel vacuum hose
The universal metal hose is used as a compensation element, a sealing element, a connection element and a damping element in various gas transmission and infusion pipeline systems, and it can be used for the length, temperature, position and angle brought by any factor Position compensation has been applied in various fields such as aerospace, petrochemical industry, mining electronics, mechanical shipbuilding, medical and health care, light textile electronics, and energy construction.
Bellows used in general metal hoses include spiral and ring.
Corrugated metal hose
General metal hose installation and use matters
- Standard “General Technical Conditions for Corrugated Metal Hose” (GB/T14525-93)
- The corrugated tube of the metal hose is made of chromium-nickel austenitic stainless steel. When using it, pay attention to prevent the pitting of nitrogen ions and the dilute sulfuric acid, and the corrosive destruction of dilute sulfuric acid.
- After the water pressure test is carried out on the equipment and piping system equipped with metal hoses, users should prevent the impact of rust blocks and the deposition of chloride ion-containing sediments, causing corrosion and mechanical damage.
- During installation, the metal hose must be protected from splashes and mechanical damage during welding, otherwise it will cause leakage.
- The tight piping system should strictly abide by the safety operation regulations to prevent the hose from being pulled off or bursting due to overpressure caused by improper operation or other factors.
- Please carefully digest the example of the installation method of the metal hose, and install and use it strictly according to the correct sketch.
