Etelux

Automatic Pressure Control Kit is an automatic pressure control kit for Etelux glovebox to keep Glovebox Chamber at constant pressure from -1.25Kpa to 1.25 KPa

 

 

 

 

Bürkert 2/2-way solenoid valve (type 6013) with G1/4 inch threads and 230V AC coil. Normally closed (opens when energized). Suitable for clean media (max 100°C) and an operating pressure of 0-10 bar (direct operated). Brass housing with FKM seal. The orifice is 3mm and the Kv-value is 0.23m³/h (3.8 l/min at dP=1 bar, water).

 

 

• Including purification materials
• For the highly efficient removal of O₂ and H₂O
• Temperature control for the filter column
• Achievable values for O₂ and H₂O < 1 ppm
• For gloveboxes up to 2.6 m³

KF Hardware (also referred to as NW) assemblies consist of two Flanges, a Center-Rings and an aluminum Clamp. Quick Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

KF Hardware (also referred to as NW) assemblies consist of two Flanges, a Center-Rings and an aluminum Clamp. Quick Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

KF Hardware (also referred to as NW) assemblies consist of two Flanges, a Center-Rings and an aluminum Clamp. Quick Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.