Automotive Oxygen Sensor,Part Number:C43981-R21A

Add to wishlistAdded to wishlistRemoved from wishlist 0

Add to compare

Labideal

Category: Oxygen Sensors

Teledyne has a long and successful history in the development and supply of oxygen sensors for automotive emission testing equipment.
The “R” series sensors are used by most automotive emission equipment manufacturers worldwide. We are striving to improve our sensors through aggressive research and development, assuring the highest quality products offered by any supplier of oxygen analyzers.

Recent major breakthroughs by Teledyne include the utilization of a special plating on the cathode resulting in a 200 times greater resistance to the effects of CO₂. This increases the useful life of the sensor when used in exhaust emission testing.
Because of this innovation, the field failure rate for Teledyne sensors has diminished to less than 1% over the last year for hundreds of thousands of sensors shipped annually. From our clients’ perspective, there are far fewer field service calls due to the oxygen sensor not functioning properly.
Teledyne is committed to maintaining competitive pricing to assure our clients benefit from the most advanced design in oxygen sensors. To demonstrate the quality of Teledyne’s oxygen sensors, we have certification from the Bureau of Automotive Repairs for BAR97, BAR90, and the PTB as a stand alone component.
The response of the sensors meets or exceeds the required time response, and the quality and reliability of the sensors are beyond standard requirements. In addition, Teledyne is an ISO-9001 certified quality management system company, dedicated to quality, performance and customer satisfaction.

Specification: Automotive Oxygen Sensor,Part Number:C43981-R21A

Class	R-21A
Part Number	C43981-R21A
Application	The "R" series of sensors are used by most automotive emission equipment manufacturers worldwide.
Warranty	12 months
Output Range	7-13 mV in air at 25°C (77°F), sea level (standard); other ranges optional
Range	0 to 100% O2
Resolution	Better than 0.1% O2
Linearity	± 1% of full scale at constant temperature and pressure
Expected Life	36 months at 20.9% oxygen, 25°C (77°F), 50% RH
Response Time	30 seconds or less 10/9% O2 to 0.1% O2 (actual response of sensor is < 6 seconds 0 to 90% O2)
Temperature	32° to 122°F (0° to 50°C) ± 5% of reading over the operating range (at thermal equilibrium)
Humidity	0 to 99% RH, non-condensing
Cross Interference	Less than 0.1% O2 response to: 15% CO2, balance N2 7% CO, balance N2 3000 ppm NO, balance N2 3000 ppm HC (Hexane), balance N2
Connectors	3 Pin Molex
Approvals	PTB, BAR97, BAR90, CE

Automotive Oxygen Sensor,Part Number:C43981-R21A