Acrylic Vacuum Chamber, Cube, 10 inch inside dimensions, Gas Spring Supported Lid

Product Specifications
Vacuum Rating:0.075 Torr (75 micron)
Vacuum Loss Rate:5.25 Torr (0.2 inHg) in 24 hours
Inside Dimensions (inch):10 High X 10 Wide X 10 Deep
Product Dimensions (inch):12 High X 12 Wide X 12 Deep
Tolerance (inch):+/- 0.125
Chamber Material:Clear Cast Acrylic
Lid Material:Clear Cast Acrylic
Seal:Buna O-Ring
Approximate Volume:1000 cubic inch; 4.3 Gallons; 16.4 liters

Features
Gas Spring Supported Hinged Top Lid
Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
One Handle
2 clamps
One Year Safe Buyback Guarantee

Description
10 inch X 10 inch X 10 inch chamber is made of clear acrylic which is fully transparent enabling a full view of chamber interior during operation. This is a complete clear acrylic vacuum chamber; assembled and ready for use. It comes with a vacuum gauge, two valves, two handles, two clamps, and two gas springs to keep your lid from slamming down against the chamber.
A Vacuum chamber can also be used as a Desiccator cabinet. Common applications include vacuum testing, vacuum product testing, degassing, defoaming, mixing liquids, bubble leak testing, vacuum sealing, vacuum drying, vacuum encapsulation, vacuum joining, vacuum impregnation, atmospheric testing and simulation, biological tests or storing samples under sustained low and intermediate vacuums.
Please note that plastic material is permeable; therefore, acrylic chambers as such may not maintain a stable vacuum level over extended period of time. For stable vacuum levels in this chamber, it is advisable to either leave the vacuum line or pump constantly connected to this chamber or add a vacuum controller to control vacuum levels.