Labideal GPR-1600 W Wall Mount PPM Oxygen Analyzer

GPR-1600 series oxygen analyzer utilizes electrochemical micro-fuel cell type advanced PPM oxygen sensor capable of precisely measuring oxygen concentrations ranging from low PPM to 1% with over 24 months operating life with no maintenance required, menu driven controls and a stainless steel integral sample system with a 4-way sample/bypass valve that enables isolation of the sensor, a feature that brings the analyzer online and to a low PPM levels in minutes.

• Calibration – certified gas of O2 balance N2 approximating 80% of range above analysis range recommended for optimum results
• Flow sensitivity – none, between 1 – 3 scfh, 2 scfh recommended
• Barometric pressure and temperature compensation
• Controls – water resistant keypad, menu driven range selection, calibration, alarm and system functions
• >0.995% over all ranges linearity
• Response time – 90% of final reading in less than 60 sec
• Less than 0.5% full scale sensitivity
• 316L stainless steel wetted parts
• Pressure regulate to 5 – 30 psig inlet and atmospheric vent
• Sensor – model GPR-13-2000UHP, 24 months expected life at 25 deg C, 1 atmosphere, average O2 less than 1000 PPM and 12 months warranty time
• Alarm type – two adjustable form C non-latching relay contacts, weak sensor indicator, power and system failure
• Data acquisition – selectable data point intervals
• Recovery time – 60 sec in air to less than 10 PPM in less than 1 hr on N2 purge
• Sample system – flow control, 4-way sample/bypass valves and flow indicator
• Auto-zero, span calibration
• Remote communication link
• 12 months warranty