T-1A ppm Fuel Cell oxygen sensor
| Measuring Range | 0-10 PPM Oxygen |
| Accuracy 1 | +/-2% of Full Scale |
| Signal Output 2 | 285- 590 uA |
| Linearity | +/-2% of Full Scale |
| Response T90 | 7 sec |
| Temp Coefficient | compensated |
| Operating Temp | 0 to 45oC |
| Recommended Storage 3 | 0 to 25°C |
| Temperature Coefficient | Compensated |
| Shelf Life 4 | 6 months |
| Humidity Non-condensing | 0-99% RH |
| Expected Life | 18-24 months |
| Warranty 5 | 12 months |
| Electrical Connector | 2 Ring Gold Disk |
* Conditions – Specification validated during design and in pursuit of improvement are subject to change without notice
- At constant temperature and pressure.
- In air (20.9% oxygen) at 25°C and 1 atm.
- Sensor may be stored up to 55°C on an intermittent basis, for example, during transportation.
- In original Package at 25°C and 1 atm.
- Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries In. will not be liable for buyer’s negligence, misapplication, abuse or accident.
T-1A ppm Fuel Cell oxygen sensor
Original price was: $399.00.$315.00Current price is: $315.00.
