Acrylic Vacuum Chamber, Cube, 14 inch inside dimensions, Top Load Model, Clamping Lid

Product Specifications
Vacuum Rating:0.075 Torr (75 micron)
Vacuum Loss Rate:5.25 Torr (0.2 inHg) in 24 hours
Inside Dimensions (inch):14 High X 14 Wide X 14 Deep
Product Dimensions (inch):16 High X 16 Wide X 16 Deep
Tolerance (inch):+/- 0.125
Chamber Material:Clear Cast Acrylic
Lid Material:Clear Cast Acrylic
Seal:Buna O-Ring
Approximate Volume:2744 cubic inch – 11.9 Gallon – 45.0 Liters

Features
Fully removable Lid
Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Two Handles
4 clamps
One Year Safe Buyback Guarantee

Description
14 inch X 14 inch X 14 inch inside dimensions chamber is made of clear acrylic which is fully transparent enabling a full view of chamber interior during operation. This is a complete clear acrylic vacuum chamber; assembled and ready for use. It comes with a vacuum gauge, two valves, two handles, and four clamps. The vacuum gauge, valves, and clamps are on the lid, but can be moved if requested.
A Vacuum chamber can also be used as a Desiccator cabinet. Common applications include vacuum testing, vacuum product testing, degassing, defoaming, mixing liquids, bubble leak testing, vacuum sealing, vacuum drying, vacuum encapsulation, vacuum joining, vacuum impregnation, atmospheric testing and simulation, biological tests or storing samples under sustained low and intermediate vacuums.
Please note that plastic material is permeable; therefore, acrylic chambers as such may not maintain a stable vacuum level over extended period of time. For stable vacuum levels in this chamber, it is advisable to either leave the vacuum line or pump constantly connected to this chamber or add a vacuum controller to control vacuum levels.